top of page

pvc plastisol coated steel

PVC Plastisol coated steel consists of a top-quality galvanized steel base that is coated initially with a primer paint followed by the PVC top coat, resulting in a highly durable product that is resistant to fading and scratching. PVC Plastisol coatings have been tested and classified as Class 0 in accordance with building regulations BS476 part 6 1989 and Part 7 1987. PVC Plastisol comes with a leathergrain embossed finish, a wide range of colors, and a manufacturer's expected lifespan of up to 25 years to first maintenance, this product is an excellent choice for those looking for a long-lasting and reliable solution. Notes: Kingspan leathergrain plastisol coating range is are known as XL Forte To discuss pvc plastisol coated steel finishes in more detail please contact us.

finish properties

finish property
unit of measure
value
test standard
nominal organic coating thickness
µm (micron)
200
EN 13523-1
gloss (60°)
%
15-35
scratch resistance
g
>3500
EN1523-1
abrasion resistance (taber, 250 rev, 1kg)
mg
<12
EN1523-2
flexibility: reverse impact
J
≥18
EN1523-12
adhesion (cross hatch)
%
100% pass
EN1523-16
minimum bend radius
T
0 T@16°C
EN1523-5
corrosion resistance:
EN1523-6
salt spray
hours
1000
EN1523-7
humidity
hours
1000
EN1523-8
max continuous operating temp
°C
60
reaction to fire
class C-s2,d0*
EN13501-1
fire performance of roof coverings
BRoof(T4)**
EN13501-5
CWFT BRoof(T1,2,3)***
CWFT 20052/403/EC

The figures contained in this table are typical properties for solid colours and do not constitute a specification.

​

* Valid for gauges ≥0.46mm for standard single sided coatings

** Valid for all gauges ≥0.4mm for all standard single sided coating as well as custom double sided coatings

*** Valid for all gauges ≥0.4mm for single sided and custom 200/100 option

downloads

Please feel free to call us on 01902 937651 during office hours to discuss your requirements

​

bottom of page